The Zyxel NWA5123-AC HD is a Wave 2 dual-radio 3x3 MU-MIMO Unified Access Point with a combined data rate of up to 1.6Gbps. Thanks to its superior hardware design with next generation beamforming technology and advanced noise suppression, the NWA5123-AC HD delivers increased coverage and improved connection speeds for every client. The high-performance NWA5123-AC HD is future-proof for the ever-growing mobility demands in high-density environments such as campuses and hotels.MU-MIMO, New Definition of Wi-FiStepping up from 802.11ac, the second generation Wave 2 technology introduces Multi-User MIMO (MU-MIMO). This is an important WiFi development that enables an AP to communicate with multiple clients at a time offering 300% performance for a 3x3 AP.Next Generation Transmit Beamforming benefits overall networkingTransmit Beamforming (TxBF) technology is another key to implement reliable high-density Wi-Fi connection. It increases overall network transmission data rates, which benefits not only MU-MIMO clients but also all existing clients.Built for Superior performanceThe NWA5123-AC HD is built with a high-efficiency antenna module, premium power amplifiers and low-noise elements delivering superior wireless performance over other Wave 2 access points on the market.Optimized wireless experience with advanced featuresTo provide outstanding performance in crowded environment, NWA5123-AC HD features 3G/4G interference immunity, excellent receive sensitivity and DCS, which enlarge its service coverage for more clients and better quality of connection.Unified access point- Fits all businessesStay standalone mode if you re a start-up, needing just few APs; convert to controller-managed mode when business grows up, requiring hundreds of APs.
Features | |
2.4 GHz: | |
5 GHz: | |
Maximum data transfer rate: | 1300 Mbit/s |
Wi-Fi data rate (max): | 1300 Mbit/s |
Ethernet LAN data rates: | 10,100,1000 Mbit/s |
Throughput data rate: | 1600 Mbit/s |
Networking standards: | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u |
Channel bandwidth: | 80 MHz |
MIMO: | |
Modulation: | 16-QAM, 64-QAM, 256-QAM, BPSK, CCK, DBPSK |
Wi-Fi Multimedia (WMM) features: | WMM power saving |
VLAN support: | |
Maximal-Ratio Combining (MRC): | |
Maximum Likelihood Detection (MLD): | |
Cyclic Delay Diversity (CDD): | |
Quality of Service (QoS) support: | |
Receiver sensitivity: | -103 dBm |
Security | |
Security algorithms: | 802.1x RADIUS, EAP, LEAP, WPA, WPA-Enterprise, WPA-PSK, WPA2, WPA2-Enterprise, WPA2-PSK |
MAC address filtering: | |
Number of SSID supported: | 16 |
Access Control List (ACL): | |
Protocols | |
DHCP client: | |
Management protocols: | SNMP v2c/v3 |
Management features | |
Switch type: | Managed |
Batch upgrade: | |
Firmware upgradeable: | |
Ports & interfaces | |
Ethernet LAN (RJ-45) ports: | 2 |
RS-232 interface: | |
DC-in jack: | |
Power | |
Power over Ethernet (PoE): | |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Output voltage: | 12 V |
Output current: | 2 A |
Power consumption (typical): | 15.5 W |
Design | |
Placement: | Ceiling, Wall |
Product colour: | White |
Cable lock slot: | |
Cable lock slot type: | Kensington |
Internal: | |
Antenna | |
Antenna gain level (max): | 3 dBi |
Weight & dimensions | |
Width: | 211 mm |
Depth: | 223 mm |
Height: | 39 mm |
Weight: | 750 g |
Packaging data | |
Package width: | 251 mm |
Package depth: | 247 mm |
Package height: | 55 mm |
Package weight: | 990 g |
Packaging content | |
AC adapter included: | |
Mounting kit: | |
Operational conditions | |
Operating relative humidity (H-H): | 10 - 90% |
Operating temperature (T-T): | -20 - 60 °C |
Storage temperature (T-T): | -20 - 70 °C |
Storage relative humidity (H-H): | 10 - 90% |
Logistics data | |
Harmonized System (HS) code: | 85176990 |