Veracity VAD-PP network card Ethernet 100 Mbit/s

The Veracity Pinpoint IP Camera Setup Adaptor is an IP video installation tool for viewing and configuration of IP PoE cameras using a laptop or other portable device, without removing the camera from the network and losing PoE power. Compared to the trial-and-error process where an installer works with a partner in the control room communicating via phone or radio, the adaptor can be installed by a single installer in less time enabling precise camera configuration for the best image possible.Universally compatible, the Pinpoint IP Camera Setup Adaptor supports IEEE 802.3af PoE, POE Plus, non-standard types of PoE up to 30W, 10BASE-T and 100BASE-TX Ethernet. The compact adaptor (65 x 32 x 20 mm) also features an LED that indicates PoE.- IP video installation tool for viewing and configuration of an IP PoE camera using a laptop or other portable device- Installation without removing camera from the network and losing PoE power- Time-saving method for accurately focusing IP PoE cameras with a standard Cat5E patch cable- IEEE 802.3af PoE, POE Plus, non-standard types of PoE up to 30W, 10BASE-T and 100BASE-TX Ethernet- Compact adaptor (65 x 32 x 20 mm)- LED indicator for PoE

Ports & interfaces
Connectivity technology:	Wired
Host interface:	RJ-45
Interface:	Ethernet
Ethernet LAN (RJ-45) ports:	3
Network
Maximum data transfer rate:	100 Mbit/s
Networking standards:	IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Ethernet LAN:
Cabling technology:	10/100BaseT(X)
Design
Internal:
LED indicators:
Certification:	CE, FCC
Operational conditions
Operating temperature (T-T):	-10 - 70 °C
Sustainability
Sustainability certificates:	RoHS
Weight & dimensions
Width:	65 mm
Depth:	32 mm
Height:	20 mm
Weight:	58 g
Other features
Connector(s):	2 x PoE RJ-45, 1 x RJ-45
Power LED:
Link/Act LED: