Water 3.0 360 ARGB Sync EditionThermaltake Water 3.0 360 ARGB Sync Edition comes with three 120 mm fan with a large surface radiator, high performance waterblock and pump for ultimate CPU cooling. The built-in Pure ARGB fan features compression blades, hydraulic bearing, and 16.8 million colors LEDs that is ready to sync with 5V RGB capable motherboards from Asus, Gigabyte, MSI and AsRock. Users can easily switch RGB lighting effects using the ARGB controller that is included in the packet, or by ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and AsRock Polychrome software. Water 3.0 ARGB Sync Edition Series allows users to enjoy better cooling performance and greater CPU protection!Tt LCS CertifiedTt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.Pure 12 ARGB Sync Radiator FanWater 3.0 ARGB Sync Edition is equipped with Thermaltake Pure 12 ARGB Sync Radiator Fan. It features compression blades, hydraulic bearing, and a 16.8 million colors LED ring with 9 addressable LEDs that is ready to sync with 5V RGB capable motherboards from Asus, Gigabyte, MSI and AsRock.Sync with Motherboard RGB SoftwareDesigned to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and AsRock Polychrome. It supports motherboards that have a 5V addressable RGB header, allowing you to control the lights directly from the above-mentioned software without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI and AsRock official websites.Switch LED Modes with ARGB ControllerThe ARGB controller allows users to switch LED modes, LED colors, and LED Speeds when using a motherboard without a 5V addressable RGB header. Users can switch between flow, ripple, pulse, blink, wave, full light, RGB spectrum, and off modes with various colors and LED speeds options.High Efficiency RadiatorSpecially designed for Water 3.0 ARGB Series, the large surface radiator increases the cooling surface and exceptional heat dissipation.High Performance WaterblockThe high performance copper base plate accelerates the heat conductivity. The pre-refilled coolant reduces any stress from liquid replenishment hassle. Additionally, the reinforced sleeved cable delivers the best durability and prevents the tubing from any damages.High Quality PumpThe high quality and reliable pump enables the maximum amount of water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.Easy InstallationFeaturing the latest cooling performance, the self-contained design of the Thermaltake Water 3.0 ARGB Sync Edition Series provides an easy installation system and a totally maintenance-free operation, requiring only the minimum amount of space in the chassis.
| Performance | |
| Suitable location: | Processor |
| Type: | All-in-one liquid cooler |
| Fan diameter: | 12 cm |
| Supported processor sockets: | LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 1366 (Socket B), LGA 2011 (Socket R), LGA 2011-v3 (Socket R), LGA 2066, Socket AM2, Socket AM2+, Socket AM3, Socket AM3+, Socket AM4, Socket FM1, Socket FM2 |
| Maximum airflow: | 56.45 cfm |
| Maximum air pressure: | 1.59 mmH2O |
| Pulse-width modulation (PWM) support: |  |
| Fan noise level (max): | 25.8 dB |
| Pump motor speed: | 3600 RPM |
| Fan speed (min): | 500 RPM |
| Fan speed (max): | 1500 RPM |
| Design | |
| Product colour: | Black |
| Number of fans: | 3 fan(s) |
| Illumination LED: | |
| Illumination colour: | Multi |
| Fan connector: | 4-pin |
| Water block material: | Copper |
| Fan controller: | |
| Power | |
| Fan power consumption: | 1.44 W |
| Pump power consumption: | 3.9 W |
| Pump voltage: | 12 V |
| Fan voltage: | 12 V |
| Weight & dimensions | |
| Radiator width: | 15.1 cm |
| Radiator depth: | 12 cm |
| Radiator height: | 2.7 cm |
| Tube length: | 40 cm |
| Weight: | 2.25 kg |
| Fan dimensions (W x D x H): | 120 x 120 x 25 mm |
| Other features | |
| Tube material: | Rubber |
| Country of origin: | China |
| Logistics data | |
| Harmonized System (HS) code: | 84733080 |
