Performance Characteristics
Transmission performance: Cat.6A acc. to ISO/IEC 11801; EN 50173-1
fully shielded
360° shielding contact and strain relief by means of two (one in the case of Cat.5e) separate, captive screw clamps for the exterior cable jacket and shielding
can be wired up from all directions, in 8x45° steps
either horizontal or vertical installation in the cable duct as a result of variable cable inlet
Type offers low installation depth; problem-free installation in floor tanks as a result of cable inlet from the side within the subfloor mounting box
option of plug-in ground connection at all four corners; according to DIN 46342-1; 6.3 mm
can be combined with covers of a wide variety of switching programs
simple wire presorting guarantees great transmission performance without damaging the wires
faceplate can be retrofitted with a flip-up loss-proof, transparent label field
protection flaps
detachable vertical fixing rail of the four-hole bearer ring (e.g. for subfloor installation)
Overbend protection: 6- (RJ11/12) and 8-pin connectors (RJ45) can be used interchangeably in the outlets without additional installation kits
Features | |
Socket type: | RJ-45 |
Sockets quantity: | 1 |
Networking cable category: | 6a |
Insulation resistance: | 500 M |
Design | |
Product colour: | White |
Housing material: | Acrylonitrile butadiene styrene (ABS), Steel, Zinc |
Operational conditions | |
Operating temperature (T-T): | -40 - 70 °C |
Weight & dimensions | |
Width: | 70 mm |
Depth: | 43.2 mm |
Height: | 50 mm |
Packaging data | |
Number of products included: | 1 pc(s) |