TRENDnet s 95W 2-Port Industrial 2.5G PoE++ Injector, model TI-IG290, allows users to add PoE++ power to a non-PoE 2.5G switch. Connect the 2-port industrial 2.5G PoE++ injector to a non-PoE 2.5G switch, and then run Ethernet cables up to 100 meters (328 ft.) to network two PoE/PoE++ devices. This multi-port industrial 2.5G PoE++ injector supplies up to 95W of power to two PoE devices with a total PoE budget of 180W. The fanless design conveniently eliminates operating noise and lowers unnecessary energy consumption. The dual port industrial 2.5G PoE++ injector is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° 70° C (-40° 167° F) for harsh industrial environments.
| Network | |
| Ethernet interface type: | 2.5 Gigabit Ethernet |
| Ethernet LAN data rates: | 10,100,1000,2500 Mbit/s |
| Networking standards: | IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x |
| Duplex system: | Full, Half |
| Features | |
| Product colour: | Black |
| Wall mountable: |  |
| Mean time between failures (MTBF): | 716685 h |
| Auto-negotiation: | |
| Certification: | FCC IEC EN60950-1 IEC 60068-2-27 IEC 60068-2-32 IEC 60068-2-6 |
| Ports & interfaces | |
| Ethernet LAN (RJ-45) ports: | 4 |
| RJ-45 input ports: | 2 |
| RJ-45 output ports: | 2 |
| Power | |
| Output power: | 96 W |
| Input voltage: | 52 56 |
| Power consumption (max): | 95 W |
| Total Power over Ethernet (PoE) budget: | 180 W |
| Operational conditions | |
| Operating temperature (T-T): | -40 - 75 °C |
| Weight & dimensions | |
| Width: | 81 mm |
| Depth: | 30 mm |
| Height: | 103 mm |
| Weight: | 170 g |
| Packaging content | |
| Number of products included: | 1 pc(s) |
| Wall mounting kit: | |
| Quick installation guide: | |
| Packaging content: | Wall |
| Technical details | |
| Sustainability compliance: | |
| Sustainability certificates: | CE |
