REBEL C50 RGBElegant in design, with modular installation options and fully designed for performance: that's the Sharkoon Rebel C50! With air-permeable paneling and perforated interior surfaces, this ATX case is made for airflow. Modular installation options allow space for up to two 360 mm radiators or eleven 120 mm fans, and even HDDs and SSDs can be modularly installed all together on a mounting bracket. A USB-C and a TRRS port on the top panel ensure future-proof connectivity.Illuminated EleganceThe hardware installed in the Rebel C50 RGB always shines in its best light thanks to its elegant, screwless side panel made of tempered glass and the four pre-installed 120 mm PWM fans with addressable RGB lighting. A modern, space-saving RGB controller in the top of the case offers connection options for the built-in fans and four additional LED components. A total of eleven 120 mm fans are possible: three in the front, four on the side panel, one on the rear panel, and three more in the top of the case. A detachable dust filter on the bottom panel provides extra protection against dust and dirt.Impressive Cooling PerformanceApart from a modular power supply tunnel, the Rebel C50 has a mounting bracket under the top of the case and another behind the mainboard tray. With these brackets, up to four fans and even a top-panel 360 mm radiator can be easily pre-mounted and then inserted into the case. In addition, there is room for another radiator alongside the mainboard tray for even more cooling performance.Graphics Card in ViewTo prevent modern graphics cards from drooping, the Rebel C50 comes with a graphics card holder, complete with a rubberized contact surface. For those who prefer to mount the graphics card vertically in the case, there is the optionally available "Rebel C50 VGCK 4.0" installation set, which is equipped with a high-performance PCIe 4.0 riser cable.Spaciously ModularUsing the mounting bracket behind the mainboard tray, also the HDDs and SSDs can be pre-mounted and placed all together inside the case. The Rebel C50 can accommodate up to three 3.5" HDDs or up to three 2.5" SSDs. Of course, the rest of the case's space is also used as efficiently as possible. Thus, there is enough room for graphics cards with a length of up to 40 cm as well as a CPU cooler with a height of up to 16.5 cm. Power supply units with a maximum length of up to 27 cm can also be accommodated.Modern Connection OptionsTo be sure of the greatest possible compatibility well into the future, the Rebel C50 not only provides a modern USB-C connection, but also a TRRS connection for audio and microphone. The ports for these connections can be found on the top panel of the case. Alongside these, there are, of course, also two USB 3.0 ports for further peripheral devices.
| Design | |
| Form factor: | Full Tower |
| Type: | PC |
| Product colour: | White |
| Supported motherboard form factors: | ATX, micro ATX, Mini-ATX |
| Number of 3.5" bays: | 3 |
| Material: | Metal, Tempered glass |
| Number of 2.5" bays: | 3 |
| Number of expansion slots: | 7 |
| Illumination: |  |
| Illumination colour: | Multi |
| Illumination location: | Case fans |
| Tempered glass panel(s): | |
| Reset button: | |
| On/off button: | |
| Maximum CPU cooler height: | 16.5 cm |
| Maximum graphics card length: | 40 cm |
| Maximum PSU length: | 27 cm |
| Power supply | |
| Power supply included: |  |
| Ports & interfaces | |
| USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity: | 1 |
| USB 3.2 Gen 2 (3.1 Gen 2) Type-A ports quantity: | 2 |
| Cooling | |
| Front fans installed: | 3x 120 mm |
| Number of front fans supported (max): | 3 |
| Front fans diameters supported: | 120,140 mm |
| Number of side fans supported (max): | 4 |
| Side fans diameters supported: | 120 mm |
| Rear fans installed: | 1x 120 mm |
| Number of rear fans supported (max): | 1 |
| Rear fans diameters supported: | 120 mm |
| Number of top fans supported (max): | 3 |
| Top fans diameters supported: | 120,140 mm |
| Storage | |
| Supported HDD sizes: | 2.5,3.5" |
| Technical details | |
| Sustainability compliance: | |
| Sustainability certificates: | CE, REACH, UKCA |
| Packaging content | |
| Manual: | |
| Weight & dimensions | |
| Width: | 230 mm |
| Depth: | 460 mm |
| Height: | 495 mm |
| Weight: | 9.3 kg |
