PLANET IGS-20040MT is a fully-managed Gigabit fiber switch usually designed for the industrial network. It features 16 10/100/1000BASE-T copper ports, 4 100/1000BASE-X SFP ports and redundant power system in an IP30 rugged but compact-sized case that can be installed in any difficult environment without space limitation. It provides user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions and Layer 3 static routing capability. The IGS-20040MT can operate stably under the temperature range from -40 to 75 degrees C and allows either DIN-rail or wall mounting for efficient use of cabinet space. With 4 dual-speed SFP fiber slots, it can be flexibly applied to extend the connection distance.Network with Cybersecurity Helps Minimize Security RisksThe IGS-20040MT comes with enhanced cybersecurity to fend off cyberthreats and cyberattacks. It supports SSHv2, TLS and SSL protocols to provide strong protection against advanced threats. Served as a key point to transmit data to customer's critical equipment in a business network, the cybersecurity feature of the IGS-20040MT protects the switch management and enhances the security of the mission-critical network without any extra deployment cost and effort.Redundant Ring, Fast Recovery for Surveillance SystemThe IGS-20040MT supports redundant ring technology and features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer s industrial automation network to enhance system reliability and uptime in harsh factory environments. In certain simple Ring network, the recovery time of data link can be as fast as 10ms.Modbus TCP Provides Flexible Network Connectivity for Factory AutomationWith the supported Modbus TCP/IP protocol, the IGS-20040MT can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enables administrators to remotely monitor the industrial Ethernet switch s operating information, port information, communication status, and DI and DO status, thus easily achieving enhanced monitoring and maintenance of the entire factory. 1588 Time Protocol for Industrial Computing NetworksThe IGS-20040MT is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet.SMTP/SNMP Trap Event AlertThe IGS-20040MT provides SMTP/SNMP event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, or the rebooting response.Effective Alarm Alert for Better ProtectionThe IGS-20040MT supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature, the users would not have to waste time finding where the problem is. It will help to save time and human resource.Digital Input and Digital Output for External AlarmThe IGS-20040MT supports Digital Input and Digital Output on its upper panel. The external alarm enables users to use Digital Input to detect external device s status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-20040MT port is link-down, link-up or power-dead.Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible ManagementTo help customers stay on top of their businesses, the IGS-20040MT not only provides high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to cross over different VLANs and different IP addresses for the purpose of having a highly-secure, flexible management and simpler networking application.Robust Layer 2 FeaturesThe IGS-20040MT can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-20040MT provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-20040MT allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 10 trunk groups with 8 ports per trunk group, and supports fail-over as well.Efficient ManagementFor efficient management, the IGS-20040MT is equipped with console, Web and SNMP management interfaces.With the built-in Web-based management interface, the IGS-20040MT offers an easy-to-use, platform-independent management and configuration facility.For text-based management, it can be accessed via Telnet and the console port.For standard-based monitor and management software, it offers SNMPv3 connection which encrypts the packet content at each session for secure remote management. Powerful Security from Layer 2 to Layer 4The IGS-20040MT offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy.Advanced IP Network ProtectionThe IGS-20040MT also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.Flexibility and Extension SolutionThe additional four mini-GBIC slots built in the IGS-20040MT support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to above 10/20/40/60/80/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.Intelligent SFP Diagnosis MechanismThe IGS-20040MT supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.Environmentally Hardened DesignWith IP30 aluminum industrial case protection, the IGS-20040MT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. It also possesses an integrated power supply source with wide range of voltages (9 to 48V DC or 24V AC) for worldwide high availability applications requiring dual or backup power inputs. Being able to operate under the temperature range from -40 to 75 degrees C, the IGS-20040MT can be placed in almost any difficult environment.
| Management features | |
| Switch type: | Managed |
| Switch layer: | L2+ |
| Quality of Service (QoS) support: |  |
| Web-based management: | |
| Traffic classification: | |
| ARP inspection: | |
| System event log: | |
| Ports & interfaces | |
| Basic switching RJ-45 Ethernet ports quantity: | 16 |
| Basic switching RJ-45 Ethernet ports type: | Gigabit Ethernet (10/100/1000) |
| Gigabit Ethernet (copper) ports quantity: | 16 |
| SFP module slots quantity: | 4 |
| Fiber optic connector: | MiniGBIC |
| Console port: | RJ-45 |
| Network | |
| Networking standards: | IEEE 1588v2, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1ag, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ah, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| 10G support: |  |
| Copper ethernet cabling technology: | 10BASE-T, 100BASE-TX, 1000BASE-T |
| Port mirroring: | |
| Full duplex: | |
| Flow control support: | |
| Link aggregation: | |
| Broadcast storm control: | |
| Rate limiting: | |
| Auto MDI/MDI-X: | |
| Spanning tree protocol: | |
| Auto-negotiation: | |
| MAC address auto-learning supported: | |
| MAC address auto-aging supported: | |
| VLAN support: | |
| Virtual LAN features: | Stacked VLAN, Private VLAN, Tagged VLAN, Protocol-based VLAN |
| Number of VLANs: | 4095 |
| Optical fiber | |
| Fiber ethernet cabling technology: | 100BASE-FX, 1000BASE BX, 1000BASE LX, 1000BASE SX |
| Data transmission | |
| MAC address table: | 8000 entries |
| Switching capacity: | 40 Gbit/s |
| Throughput: | 29.7 Mpps |
| Store-and-forward: | |
| Number of queues: | 8 |
| Number of IP interfaces: | 8 |
| Jumbo frames support: | |
| Jumbo frames: | 9216 |
| Security | |
| Access Control List (ACL): | |
| IGMP snooping: | |
| Security algorithms: | 802.1x RADIUS, SSH, SSL/TLS |
| SSH/SSL support: | |
| Loop protection: | |
| BPDU filtering/protection: | |
| Authentication: | MAC-based authentication, Port-based authentication |
| Multicast features | |
| Multicast support: | |
| Number of multicast groups filtered: | 255 |
| Protocols | |
| Management protocols: | Telnet, SNMP |
| Supported network protocols: | IPv4 / IPv6 |
| Design | |
| Rack mounting: | |
| Product colour: | Blue, White |
| Housing material: | Aluminium |
| Reset button: | |
| LED indicators: | |
| International Protection (IP) code: | IP30 |
| Wall mountable: | |
| DIN rail mounting: | |
| Certification: | FCC, CE |
| Power | |
| Redundant power supply (RPS) support: | |
| Power consumption (typical): | 8 W |
| Power consumption (max): | 17 W |
| Power over Ethernet (PoE) | |
| Power over Ethernet (PoE): | |
| Operational conditions | |
| Operating temperature (T-T): | -40 - 75 °C |
| Storage temperature (T-T): | -40 - 85 °C |
| Operating relative humidity (H-H): | 5 - 95% |
| Storage relative humidity (H-H): | 5 - 95% |
| Heat dissipation: | 27 BTU/h |
| Weight & dimensions | |
| Width: | 76.8 mm |
| Depth: | 107.3 mm |
| Height: | 152 mm |
| Weight: | 1.04 kg |
| Logistics data | |
| Harmonized System (HS) code: | 85176990 |
| Other features | |
| Terminal block port: | |
