Environmentally Hardened DesignPLANET Industrial 8-port Gigabit 802.3at PoE+ Switch, IGS-10020HPT, is equipped with a rugged IP30 metal case for stable operation in heavy industrial demanding environments. Thus, the IGS-10020HPT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets.Being able to operate under wide temperature range from -40 to 75 degrees C, the IGS-10020HPT can be placed in almost any difficult environment. The IGS-10020HPT also allows either DIN rail or wall mounting for efficient use of cabinet space.Redundant Ring, Fast Recovery for Critical Network ApplicationsThe IGS-10020HPT supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer s industrial automation network to enhance system reliability and uptime in harsh factory environments.The IGS-10020HPT also protects customer s industrial network connectivity with switching recovery capability that is used for implementing fault tolerant ring and mesh network architectures. If the Industrial network was interrupted accidentally, the fault recovery times could be less than 50ms to quickly bring the network back to normal operation.Vehicle and ITS Industrial Ethernet PoE SolutionThe IGS-10020HPT is compliant with E-Mark requirements, making it suitable for a variety of in-vehicle applications and surveillance system. To facilitate the 802.3at PoE+ usage with commonly used 12~48V DC power input for transportation and industrial-level applications, the IGS-10020HPT adopts 12~48V DC to 52V power boost technology to solve power source issue but does not require special power supplies. It fulfills the needs of power plus data delivery for surveillance system, video transmission and wireless service on the bus, shuttle and other vehicles.High Power PoE for Security and Public Service ApplicationsTo fulfill the demand of High Power PoE for network applications with Gigabit speed transmission under wide temperature, the IGS-10020HPT provides 8 10/100/1000Mbps ports featuring IEEE 802.3at Power over Ethernet Plus (PoE+) that combines up to 36-watt power output and data per port over one Cat5E/6 Ethernet cable. As the whole system comes with a total 240-watt PoE budget, the IGS-10020HPT is designed specifically to satisfy the growing demand of higher power consuming network PDs (powered devices) such as multi-channel (802.11a/b/g/n) wireless LAN access points, PTZ (Pan, Tilt & Zoom)/Speed Dome network cameras and other PoE network devices, doubling that of the current conventional 802.3af PoE.Convenient and Smart ONVIF Devices with Detection FeaturePLANET has newly developed an awesome feature -- ONVIF Support -- which is specifically designed for co-operating with video IP surveillances. From the IGS-10020HPT s GUI, you just need one click to search and show all of the ONVIF devices via network application. In addition, you can upload floor images to the switch and can remotely monitor or inspect an assembly line. Moreover, you can get real-time surveillance information and online/offline status; the PoE reboot can be controlled from the GUI.Built-in Unique PoE Functions for Surveillance ManagementAs an Industrial managed PoE Switch for surveillance network, the IGS-10020HPT features the following intelligent PoE management functions:PD Alive CheckScheduled Power RecyclingPoE ScheduleSMTP/SNMP Trap Event Alert Intelligent Powered Device Alive CheckThe IGS-10020HPT PoE Switch can be configured to monitor connected PD s status in real time via ping action. Once the PD stops working and responding, the IGS-10020HPT will recycle the PoE port power and bring the PD back to work. It also greatly enhances the reliability in that the PoE port will reset the PD power, thus reducing administrator s management burden.Scheduled Power RecyclingThe IGS-10020HPT allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.PoE Schedule for Energy SavingUnder the trend of energy saving worldwide and contributing to environmental protection on the Earth, the IGS-10020HPT can effectively control the power supply besides its capability of giving high watts power. The built-in PoE schedule function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money.SMTP/SNMP Trap Event AlertThe IGS-10020HPT provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, or the rebooting response.Effective Alarm Alert for Better ProtectionThe IGS-10020HPT supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature, the users would not have to waste time finding where the problem is. It will help to save time and human resource.Digital Input and Digital Output for External AlarmThe IGS-10020HPT supports Digital Input and Digital Output on its upper panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-10020HPT port shows link down, link up or power failure.Layer 3 IPv4 and IPv6 Software VLAN Routing for Secure and Flexible ManagementTo help customers stay on top of their businesses, the IGS-10020HPT not only provides ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLAN routing feature which allows to crossover different VLANs and different IP addresses for the purpose of having a highly-secure, flexible management and simpler networking application.Robust Layer 2 FeaturesThe IGS-10020HPT can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-10020HPT provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-10020HPT allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 5 trunk groups with 2 ports per trunk group, and supports fail-over as well. Efficient Secure ManagementFor efficient management, the IGS-10020HPT is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, the IGS-10020HPT offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the IGS-10020HPT can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management software by supporting SNMPv3 connection which encrypts the packet content at each session.Powerful SecurityThe IGS-10020HPT offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.Cybersecurity Network Solution to Minimize Security RisksThe cybersecurity features that virtually need no effort and cost to have included the protection of the switch management and the enhanced security of the mission-critical network. Both SSH and SSL protocols are utilized to provide strong protection against advanced threats. The network administrator can now construct highly-secure corporate networks with considerably less time and effort than before.Flexibility and Extension SolutionThe additional two mini-GBIC slots built in the IGS-10020HPT support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters to 2km (multi-mode fiber) and to 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.Intelligent SFP Diagnosis MechanismThe IGS-10020HPT supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.Modbus TCP provides Flexible Network Connectivity for Factory AutomationWith the supported Modbus TCP/IP protocol, the IGS-10020HPT can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enables administrators to remotely monitor the industrial Ethernet switch s operating information, port information and communication status, thus easily achieving enhanced monitoring and maintenance of the entire factory.1588 Time Protocol for Industrial Computing NetworksThe IGS-10020HPT is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet.
| Management features | |
| Switch type: | Managed |
| Switch layer: | L2+ |
| Quality of Service (QoS) support: |  |
| Web-based management: | |
| Traffic classification: | |
| ARP inspection: | |
| System event log: | |
| Ports & interfaces | |
| Basic switching RJ-45 Ethernet ports quantity: | 8 |
| Basic switching RJ-45 Ethernet ports type: | Gigabit Ethernet (10/100/1000) |
| SFP module slots quantity: | 2 |
| Fiber optic connector: | MiniGBIC |
| Console port: | RJ-45 |
| Network | |
| Networking standards: | IEEE 802.1D, IEEE 802.1ab, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| 10G support: |  |
| Port mirroring: | |
| Full duplex: | |
| Flow control support: | |
| Link aggregation: | |
| Broadcast storm control: | |
| Auto MDI/MDI-X: | |
| Spanning tree protocol: | |
| Auto-negotiation: | |
| MAC address auto-learning supported: | |
| MAC address auto-aging supported: | |
| VLAN support: | |
| Virtual LAN features: | Stacked VLAN, Private VLAN, Tagged VLAN, Protocol-based VLAN |
| Number of VLANs: | 4094 |
| Optical fiber | |
| Fiber ethernet cabling technology: | 100BASE-FX, 1000BASE BX, 1000BASE LX, 1000BASE SX |
| Data transmission | |
| MAC address table: | 8000 entries |
| Switching capacity: | 26 Gbit/s |
| Throughput: | 14.8 Mpps |
| Store-and-forward: | |
| Number of queues: | 8 |
| Number of IP interfaces: | 8 |
| Jumbo frames support: | |
| Jumbo frames: | 9000 |
| Security | |
| Access Control List (ACL): | |
| IGMP snooping: | |
| Security algorithms: | SNMP, SSH, SSL/TLS |
| Loop protection: | |
| BPDU filtering/protection: | |
| Authentication: | MAC-based authentication, Port-based authentication |
| Multicast features | |
| Multicast support: | |
| Protocols | |
| Management protocols: | Telnet, SNMP v1/v2c |
| Supported network protocols: | IPv4 / IPv6 |
| Design | |
| Rack mounting: | |
| Product colour: | Black, White |
| Housing material: | Aluminium |
| Reset button: | |
| LED indicators: | |
| International Protection (IP) code: | IP30 |
| Wall mountable: | |
| DIN rail mounting: | |
| Certification: | FCC Part 15 Class A, CE |
| Performance | |
| Firmware upgradeable: | |
| Power | |
| Redundant power supply (RPS) support: | |
| Input voltage: | 48 V |
| Power consumption (typical): | 31.9 W |
| Power over Ethernet (PoE) | |
| Power over Ethernet (PoE): | |
| Power over Ethernet plus (PoE+) ports quantity: | 8 |
| Power over Ethernet (PoE) power per port: | 36 W |
| Total Power over Ethernet (PoE) budget: | 270 W |
| Operational conditions | |
| Operating temperature (T-T): | -40 - 75 °C |
| Storage temperature (T-T): | -40 - 85 °C |
| Operating relative humidity (H-H): | 5 - 95% |
| Weight & dimensions | |
| Width: | 152 mm |
| Depth: | 107 mm |
| Height: | 72 mm |
| Weight: | 1.68 kg |
| Logistics data | |
| Harmonized System (HS) code: | 85176990 |
