PLANET GT805A network media converter 1000 Mbit/s Multi-mode Black

Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-802S40, GT-806S60, GT-805A and GT-806A/B media converters support conversion between 10/100/1000BASE-T and 1000BASE-SX/LX networks. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.Distance Extension with High Performance and Steady Network CommunicationsPLANET GT-80x gigabit media converter series extends communication distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX interfaces for various fiber optic applications. The available fiber interfaces are shown below:Enhanced Smart Management FeaturesThe GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Passthrough function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. The DIP switch can disable or enable the LFP function.- LLCF means when a device connected to the converter and the TP line loses the link, the converter s fiber will disconnect the link of transmission. - LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter s fiber will disconnect the link of transmission.Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network.Easy InstallationThe GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX, the Gigabit media conversion installation is quite quick and easy with its Plug and Play feature. The GT-80x also supports flow control and back pressure in half-duplex mode to eliminate packet loss.

Network
Maximum data transfer rate:	1000 Mbit/s
Converter input interface:	10Base-T, 100Base-T, 1000Base-T
Converter output interface:	1000Base-LX, 1000Base-SX
Networking standards:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Ethernet interface type:	Gigabit Ethernet
Ethernet LAN data rates:	10,100,1000 Mbit/s
Auto MDI/MDI-X:
Duplex system:	Full, Half
Ports & interfaces
Fiber optic connector:	SFP
Connectivity technology:	Wired
Ethernet LAN (RJ-45) ports:	2
Performance
Maximum transfer distance:	100 m
Fiber mode structure:	Multi-mode
Fiber cable diameters supported (core/cladding):	9/125,50/125,62.5/125 µm
Design
Internal:
LED indicators:
Product colour:	Black
DIN rail mounting:
Certification:	FCC Class A, CE Class A
Power
Input voltage:	5 V
Input current:	2 A
Power consumption (typical):	5.6 W
Weight & dimensions
Width:	94 mm
Depth:	70 mm
Height:	26 mm
Weight:	200 g
Operational conditions
Operating temperature (T-T):	0 - 50 °C
Storage temperature (T-T):	-10 - 70 °C
Operating relative humidity (H-H):	5 - 95%
Storage relative humidity (H-H):	5 - 95%
Logistics data
Harmonized System (HS) code:	85176990