With netPower 15FR switch you can forget about expensive GPON base stations and optical splitters. This switch is a part of our GPEN concept - aimed to bring the speed and versatility of fiber networking while using the advantages of Ethernet. It is an easy to deploy, low-cost way for any ISP to deliver the Internet to individual apartments.You don t have to worry about power options in the attic or the utility room netPower 15FR has 15 reverse PoE ports. Depending on your setup, netPower can draw the necessary power even from a single client! Another Ethernet port has PoE-out you can use it to power an aggregate link such as our Wireless Wire Dish or a security camera, for example.There are two SFP ports for fiber connectivity. The outdoor enclosure allows you to install this switch in all kinds of environments from damp attics to elevator shafts and different poles with hose clamps. netPower 15FR bringing the cost down and the speed up!netPower 15FR has a non-blocking throughput of 3.6 Gbps, switching capacity of 7.2 Gbps and forwarding rate of 5.4 Mpps.
| Ports & interfaces | |
| Basic switching RJ-45 Ethernet ports quantity: | 16 |
| Basic switching RJ-45 Ethernet ports type: | Fast Ethernet (10/100) |
| Installed SFP modules quantity: | 2 |
| Power connector: | DC-in jack |
| Network | |
| Ethernet LAN data rates: | 10,100 Mbit/s |
| Data transmission | |
| Switching capacity: | 7.2 Gbit/s |
| Throughput: | 3600 Mpps |
| Forwarding rate: | 5.4 Mpps |
| Design | |
| Product colour: | White |
| Certification: | CE/RED, EAC, ROHS |
| Performance | |
| Built-in processor: |  |
| Processor frequency: | 800 MHz |
| Memory type: | RAM |
| Internal memory: | 256 MB |
| Flash memory: | 16 MB |
| Power | |
| DC input voltage: | 18 - 57 V |
| Power consumption (max): | 29 W |
| Power over Ethernet (PoE) | |
| Power over Ethernet (PoE): | |
| Operational conditions | |
| Operating temperature (T-T): | -40 - 70 °C |
| Weight & dimensions | |
| Width: | 304 mm |
| Depth: | 212 mm |
| Height: | 71 mm |
