Longshine LCS-C842MT network media converter 100 Mbit/s

The LCS-C842 is a compact, reliable media conversion solution that provides network administrators with a cost-effective solution for migrating or upgrading copper-based networks to fiber optic-based networks. Whether data is transmitted over multi-mode, single mode or long-haul single mode fiber optics, or operating in full or half-duplex, the LCS-C842 is capable of handling the various cable configurations.Link Fault Signaling - The LFS feature supports the creation of a redundant or secondary connection. This can be an ideal solution for those mission-critical or constant service applications such as fiber To The Building (FTTB) or Fiber To The Curb (FTTC). The LFS LED provides immediately indication of when a cable has been severed or when some other cause of disruption in service has occurred. Simultaneously, data transmission will be switched to the redundant link resulting in 'non-stop' network connectivity.Loopback Test - Once enabled via a DIP-switch, the Remote or Local Loopback test feature allows the administrator to instantly determine the status of the cable connection. This offers a simpler approach to troubleshooting; no more manual inspection of cables and wiring closets.Support NWay - The LCS-C842 takes advantage of intelligent connection technology to support auto-negotiation, thereby eliminating the hassle of manually configuring or monitoring the settings. This ensures a plug-n-play' operability.Cable Flexibility & Scalability - The LCS-C842 allows you to install fiber cabling anywhere within the network diagram without having to replace existing copper-based. It's compact, modular design facilitates easy deployment in a narrow desktop location, wall-mount or as a multi-unit configuration based on the LCS-C819 12-slot standard 19" rack-mount chassis. Plus, connecting the LCS-C842 media converter to fiber segments extends distances between networking nodes of up to 60,000 meters.- Device DIP switches allow multiple configuration options;- Automatic MDI/MDI-X selection on RJ-45 port;- Auto-negotiation, NWay support on RJ-45;- Link Fault Signalling (LFS);- Remote and local loop back test;- LEDs for at-a-glance device status;- Extends distances ranging from 2km (multi-mode fiber) to 60km (single mode fiber);- Store-and-forward at full wire speed;- Internal and external power supply options;- FCC Class A & CE approved.

Network
Maximum data transfer rate:	100 Mbit/s
Cabling technology:	10/100Base-TX, 100Base-FX
Ports & interfaces
Connectivity technology:	Wired
Performance
Maximum transfer distance:	2000 m
Design
Compliance industry standards:	IEEE 802.3, IEEE 802.3u
Certification:	FCC, CE
Management features
Plug and Play:
Weight & dimensions
Weight:	158 g
Operational conditions
Operating temperature (T-T):	0 - 50 °C
Storage relative humidity (H-H):	10 - 80%
Logistics data
Harmonized System (HS) code:	85176990
Other features
Dimensions (WxDxH):	86 x 133.5 x 29 mm
Interface:	Ethernet
Connector(s):	1x RJ-45, 1x ST
Power requirements:	12V, 0.8A
Full duplex:
Fiber type:	ST