D3 SSDSC2KB019TZ01 internal solid state drive 2.5" 1920 GB Serial ATA III TLC 3D NAND

Enhanced Power Loss Data ProtectionEnhanced Power Loss Data Protection prepares the SSD for unexpected system power loss by minimizing data in transition in temporary buffers, and uses on-board power-loss protection capacitance to provide enough energy for the SSD firmware to move data from the transfer buffer and other temporary buffers to the NAND, thus protecting system and user data.Hardware EncryptionHardware encryption is data encryption done at the drive level. This is used to ensure that the data stored on the drive is secured from unwanted intrusion.End-to-End Data ProtectionEnd-to-End Data Protection ensures integrity of stored data from the computer to the SSD and back.Temperature Monitoring and LoggingTemperature Monitoring and Logging uses an internal temperature sensor to monitor and log airflow and device internal temperature. The logged results can be accessed using the SMART command.

Features
SSD form factor:	2.5"
SSD capacity:	1920 GB
Interface:	Serial ATA III
Memory type:	TLC 3D NAND
NVMe:
Component for:	Server/workstation
Hardware encryption:
Security algorithms:	256-bit AES
Data transfer rate:	6 Gbit/s
Read speed:	550 MB/s
Write speed:	510 MB/s
Random read (4KB):	91000 IOPS
Random write (4KB):	38000 IOPS
Random read (100% span):	91000 IOPS
Random write (100% span):	38000 IOPS
Random latency - read (up to):	104 µs
Random latency - write (up to):	54 µs
Sequential latency - read (up to):	37 µs
Sequential latency - write (up to):	38 µs
End-to-End Data Protection:
Enhanced Power Loss Data Protection technology:
SSD temperature monitoring:
Uncorrectable Bit Error Rate (UBER):	< 1 per 10^17 bits read
Mean time between failures (MTBF):	2000000 h
Export Control Classification Number (ECCN):	5A992C
Commodity Classification Automated Tracking System (CCATS):	G162706
HP segment:	Enterprise
Power
Power consumption (read):	3.1 W
Power consumption (write):	3.1 W
Power consumption (idle):	1.1 W
Operational conditions
Operating temperature (T-T):	0 - 70 °C
Maximum operating temperature:	70 °C
Operating vibration:	2.17 G
Non-operating vibration:	3.13 G
Operating shock:	1000 G
Non-operating shock:	1000 G
Logistics data
Harmonized System (HS) code:	84717070
Other features
Internal memory type:	SATA 3.0 6Gb/S
Processor family:	Intel SSD D3
Power consumption (active):	3.1 W
Launch date:	Q3'21
SSD endurance rating:	8.8 PBW
SSD shock:	1000G,0.5ms
Sequential reading:	550 MB/s
Sequential writing speed:	510 MB/s
Status:	Launched