FSP Champ is the high density version of double-conversion online UPS with a output power factor 0.9. It s designed in small cabinet with microprocessor controller.
Champ also have USB and RS-232 communication ports as standard, with a built-in intelligent slot for additional adapters, protocol converters and relate contact cards.
| Features | |
| UPS topology: | Double-conversion (Online) |
| Output power capacity: | 1 kVA |
| Output power: | 900 W |
| Waveform: | Pure sine |
| Input operation voltage (min): | 120 V |
| Input operation voltage (max): | 300 V |
| Input frequency: | 40 - 70 Hz |
| Output operation voltage (min): | 200 V |
| Output operation voltage (max): | 240 V |
| Output frequency: | 47/63 Hz |
| Output voltage regulation: | 1% |
| Power factor: | 0.99 |
| Crest factor: | 3:1 |
| Noise level: | 50 dB |
| Audible alarm(s): | Yes |
| Audible alarm modes: | Alarm when on battery, Fault, Low battery alarm, Overload alarm |
| Ports & interfaces | |
| Number of output IEC jumpers: | 3 |
| USB port: | Yes |
| USB 2.0 ports quantity: | 1 |
| USB port type: | USB Type-B |
| Serial interface: | Yes |
| Serial interface type: | RS-232 |
| RS-232 ports: | 1 |
| Battery | |
| Battery capacity: | 9 Ah |
| Battery voltage: | 12 V |
| Number of battery cells: | 2 |
| Typical backup time at full load: | 3.2 min |
| Typical backup time at half load: | 8.9 min |
| Design | |
| Form factor: | Tower |
| Product colour: | Black |
| Control type: | Buttons |
| Display type: | LCD |
| LED indicators: | Yes |
| Operational conditions | |
| Operating temperature (T-T): | 0 - 40 °C |
| Operating relative humidity (H-H): | 20 - 90% |
| Packaging content | |
| Batteries included: | Yes |
| Weight & dimensions | |
| Width: | 145 mm |
| Depth: | 282 mm |
| Height: | 220 mm |
| Weight: | 9.8 kg |
| Packaging data | |
| Cables included: | Input power cable, USB cable |
| Manual: | Yes |
