Superior PerformanceH3C 3Com J9152AS compatible 10GBASE-LRM SFP+ Transceiver with LC Duplex connector according to MSA standards from the brand BlueOptics. The H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ has a receiver (with 1310nm) and a transmitter (with 1310nm) for the transfer of optical signals via multi-mode fiber, taking the respective transmission protocol into account. The H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ is suitable for the use in all major H3C 3Com hardware platforms (such as switches, routers, storage systems, load balancers, gauges, etc.) that officially support the original H3C 3Com J9152AS 10GBASE-LRM SFP+. Each H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ supports Ethernet, Fibre Channel over Ethernet or SDH/SONET high-speed applications of up to 10G per second on up to 220 Meter distance. Request a test sample now!Compatibility and QualityTo ensure 100% compatibility and functionality, all H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ are tested for the use in the respective H3C 3Com hardware while being adapted to the software requirements. Every H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ from the brand BlueOptics is manufactured according to the defined MSA standards, like the original H3C 3Com J9152AS Transceiver and contains the same, if not even better, single components from well-known traditional companies for data communication technology, such as high-quality lasers (e.g from Avago or Lumentum) and qualitative ICs (e.g., Maxim Integrated, Netlogic, Mindspeed or Analog Devices). This preselection of the world's best components for optical Transceiver modules results in an over-average product lifetime of more than 10 years for all H3C 3Com J9152AS compatible BlueOptics 10GBASE-LRM SFP+. Ask for your BlueOptics sample now!Wide Range of ApplicationsH3C 3Com J9152AS compatible 10GBASE-LRM SFP+ support all popular optical data transfer applications and are designed for the use in switches, routers, storage systems and other hardware solutions that support the original H3C 3Com J9152AS 10GBASE-LRM SFP+ as stated by the H3C 3Com data sheet. The H3C 3Com J9152AS compatible BlueOptics 10GBASE-LRM SFP+ is an equivalent replacement for original H3C 3Com J9152AS 10GBASE-LRM SFP+ whose price has been artificially elevated to finance hardware such as switches. Therefore, from now on you should rely on H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ from the BlueOptics brand with the best price/performance ratio and convince yourself of their quality and functionality. The H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ support all popular applications and offer the same functionality as the original H3C 3Com J9152AS 10GBASE-LRM SFP+. Try it out and contact us now!Data Transmission at the Speed of LightFiber optic connections for optical data transmissions are not susceptible to electromagnetic interference (EMI) and offer the possibility of a wide variety of bandwidth variations. With H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ of the BlueOptics brand, you can increase your bandwidth and reduce latencies with maximum availability without any loss. H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ have a LC Duplex connector and can send and receive signals simultaneously through optical laser transmission, each over one fiber. The optimal connection should take place via an appropriate BlueOptics fiber patch cord, for example onto a patch panel or directly to another H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ Transceiver. This results in the optimum range and quality of your fiber-optic link. Optimize your network now!Error Analysis with Digital DiagnosticsSimplify troubleshooting, maintenance, and monitoring in your network with the H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ through the Digital Diagnostics Monitoring (DDM) / Digital Optical Monitoring (DOM) interface. With the help of the digital diagnostic function, which complies with MSA SFF-8472, the H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ can deliver the following information in real time: Supply voltage, laser bias current, laser average output power, laser received input power and temperature. This feature of the H3C 3Com J9152AS-compatible 10GBASE-LRM SFP+ facilitates the remote maintenance of optical transmission links. Please ensure that the DDM / DOM function is supported by the hardware in which the H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ is used, to access these features. Try it and start using BlueOptics products now!Maximum AvailabilityLess maintenance due to a long lifetime. H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ of the brand BlueOptics are using components from leading manufacturers for communication technology only, such as Lasers (like Lumentum or Avago) and Integrated Circuits (including Maxim Integrated, Netlogic, Mindspeed or Analog Devices). For this reason, H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ are designed for above average high operating times of over 1.000.000 MTBF hours. This corresponds to an average life span of 10 years and allows you to set up your network for the future. All H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ provide high availability and reduce the likelihood of a failure of important optical data links in high-speed network systems to an absolute minimum. Benefit from BlueOptics Transceivers now!Full MSA ComplianceEach H3C 3Com J9152AS compatible 10GBASE-LRM high-availability SFP+ Transceiver complies with the Multi-Source Agreement (MSA) standard SFP+ Transceiver. When setting MSA standards for optical SFP+ Transceiver modules, manufacturers define standards for the SFP+ Transceiver to ensure interoperability with different hardware systems from different manufacturers. Here the SFP+ interface is settled electrically, mechanically and functionally, to grant that the communication of the devices among each other functions smoothly, as well as an exact fit is maintained. By the definitions and specifications defined in the MSA standards, the H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ of the BlueOptics brand behave the same way as the original H3C 3Com J9152AS 10GBASE-LRM SFP+ and do not compromise any quality and functionality. Ask for a test sample now!Industrial StandardsH3C 3Com J9152AS compatible 10GBASE-LRM SFP+ meet or exceed industrial standards such as CE and RoHS and the FCC regulations. Through continuous monitoring before, during, and after the ISO9001 manufacturing process, CBO achieves a steadily consistent quality of any H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ Transceiver. The exact operation and the accuracy of the individual components of each H3C 3Com J9152AS-compatible 10GBASE-LRM SFP+ module, required for high-tech industrial applications, is controlled by various test methods. If you would like to be convinced of the nature and functionality, ask for your personal sample for testing purposes now and profit from the advantages of CBO's H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ without any risk of loss of functionality.Act Now!With the use of H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ of the BlueOptics brand, networks can be equipped to meet increasing requirements. Regardless whether an increased data volume, higher transmission rates, greater scalability, higher performance and/or a higher reliability is desired. With BlueOptics H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ Transceivers, you can improve your connections and reduce your CAPEX for pluggable optics up to 90%. If you have any doubts or concerns with equivalent H3C 3Com J9152AS 10GBASE-LRM SFP+, do not hesitate to request a free sample and benefit now, just like your competitors, from the many advantages of the H3C 3Com J9152AS compatible BlueOptics 10GBASE-LRM SFP+ Transceivers and the long-term know-how of CBO in the field of fiber optics. Buy H3C 3Com J9152AS compatible 10GBASE-LRM SFP+ from BlueOptics now!
| Performance | |
| SFP transceiver type: | Fiber optic |
| Maximum data transfer rate: | 10000 Mbit/s |
| Interface type: | SFP+ |
| Single-mode fiber (SMF) supported: |  |
| Multi-mode fiber (MMF) supported: |  |
| Fiber optic connector: | SFP+ |
| Maximum transfer distance: | 220 m |
| Wavelength: | 1310 nm |
| Fiber ethernet cabling technology: | 10GBASE-LRM |
| Digital Diagnostics Monitoring (DDM): | |
| Features | |
| Product colour: | Silver |
| Mean time between failures (MTBF): | 1000000 h |
| Certification: | RoHS, CE, FCC |
| Operational conditions | |
| Maximum operating temperature: | 70 °C |
| Weight & dimensions | |
| Weight: | 20 g |
| Packaging data | |
| Package weight: | 30 g |
| Technical details | |
| Sustainability certificates: | RoHS |
