Superior PerformanceCisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ Transceiver with LC Duplex connector according to MSA standards from the brand BlueOptics. The Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ has a receiver (with 1310nm) and a transmitter (with 1310nm) for the transfer of optical signals via single-mode fiber, taking the respective transmission protocol into account. The Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ is suitable for the use in all major Cisco hardware platforms (such as switches, routers, storage systems, load balancers, gauges, etc.) that officially support the original Cisco DS-SFP-FC16G-LW 16GBASE-LW SFP+. Each Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ supports Ethernet, Fibre Channel over Ethernet or SDH/SONET high-speed applications of up to 16G per second on up to 10 Kilometer distance. Request a test sample now!Compatibility and QualityTo ensure 100% compatibility and functionality, all Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ are tested for the use in the respective Cisco hardware while being adapted to the software requirements. Every Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ from the brand BlueOptics is manufactured according to the defined MSA standards, like the original Cisco DS-SFP-FC16G-LW Transceiver and contains the same, if not even better, single components from well-known traditional companies for data communication technology, such as high-quality lasers (e.g from Avago or Lumentum) and qualitative ICs (e.g., Maxim Integrated, Netlogic, Mindspeed or Analog Devices). This preselection of the world's best components for optical Transceiver modules results in an over-average product lifetime of more than 10 years for all Cisco DS-SFP-FC16G-LW compatible BlueOptics 16GBASE-LW SFP+. Ask for your BlueOptics sample now!Wide Range of ApplicationsCisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ support all popular optical data transfer applications and are designed for the use in switches, routers, storage systems and other hardware solutions that support the original Cisco DS-SFP-FC16G-LW 16GBASE-LW SFP+ as stated by the Cisco data sheet. The Cisco DS-SFP-FC16G-LW compatible BlueOptics 16GBASE-LW SFP+ is an equivalent replacement for original Cisco DS-SFP-FC16G-LW 16GBASE-LW SFP+ whose price has been artificially elevated to finance hardware such as switches. Therefore, from now on you should rely on Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ from the BlueOptics brand with the best price/performance ratio and convince yourself of their quality and functionality. The Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ support all popular applications and offer the same functionality as the original Cisco DS-SFP-FC16G-LW 16GBASE-LW SFP+. Try it out and contact us now!Data Transmission at the Speed of LightFiber optic connections for optical data transmissions are not susceptible to electromagnetic interference (EMI) and offer the possibility of a wide variety of bandwidth variations. With Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ of the BlueOptics brand, you can increase your bandwidth and reduce latencies with maximum availability without any loss. Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ have a LC Duplex connector and can send and receive signals simultaneously through optical laser transmission, each over one fiber. The optimal connection should take place via an appropriate BlueOptics fiber patch cord, for example onto a patch panel or directly to another Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ Transceiver. This results in the optimum range and quality of your fiber-optic link. Optimize your network now!Error Analysis with Digital DiagnosticsSimplify troubleshooting, maintenance, and monitoring in your network with the Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ through the Digital Diagnostics Monitoring (DDM) / Digital Optical Monitoring (DOM) interface. With the help of the digital diagnostic function, which complies with MSA SFF-8472, the Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ can deliver the following information in real time: Supply voltage, laser bias current, laser average output power, laser received input power and temperature. This feature of the Cisco DS-SFP-FC16G-LW-compatible 16GBASE-LW SFP+ facilitates the remote maintenance of optical transmission links. Please ensure that the DDM / DOM function is supported by the hardware in which the Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ is used, to access these features. Try it and start using BlueOptics products now!Maximum AvailabilityLess maintenance due to a long lifetime. Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ of the brand BlueOptics are using components from leading manufacturers for communication technology only, such as Lasers (like Lumentum or Avago) and Integrated Circuits (including Maxim Integrated, Netlogic, Mindspeed or Analog Devices). For this reason, Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ are designed for above average high operating times of over 1.000.000 MTBF hours. This corresponds to an average life span of 10 years and allows you to set up your network for the future. All Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ provide high availability and reduce the likelihood of a failure of important optical data links in high-speed network systems to an absolute minimum. Benefit from BlueOptics Transceivers now!Full MSA ComplianceEach Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW high-availability SFP+ Transceiver complies with the Multi-Source Agreement (MSA) standard SFP+ Transceiver. When setting MSA standards for optical SFP+ Transceiver modules, manufacturers define standards for the SFP+ Transceiver to ensure interoperability with different hardware systems from different manufacturers. Here the SFP+ interface is settled electrically, mechanically and functionally, to grant that the communication of the devices among each other functions smoothly, as well as an exact fit is maintained. By the definitions and specifications defined in the MSA standards, the Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ of the BlueOptics brand behave the same way as the original Cisco DS-SFP-FC16G-LW 16GBASE-LW SFP+ and do not compromise any quality and functionality. Ask for a test sample now!Industrial StandardsCisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ meet or exceed industrial standards such as CE and RoHS and the FCC regulations. Through continuous monitoring before, during, and after the ISO9001 manufacturing process, CBO achieves a steadily consistent quality of any Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ Transceiver. The exact operation and the accuracy of the individual components of each Cisco DS-SFP-FC16G-LW-compatible 16GBASE-LW SFP+ module, required for high-tech industrial applications, is controlled by various test methods. If you would like to be convinced of the nature and functionality, ask for your personal sample for testing purposes now and profit from the advantages of CBO's Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ without any risk of loss of functionality.Act Now!With the use of Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ of the BlueOptics brand, networks can be equipped to meet increasing requirements. Regardless whether an increased data volume, higher transmission rates, greater scalability, higher performance and/or a higher reliability is desired. With BlueOptics Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ Transceivers, you can improve your connections and reduce your CAPEX for pluggable optics up to 90%. If you have any doubts or concerns with equivalent Cisco DS-SFP-FC16G-LW 16GBASE-LW SFP+, do not hesitate to request a free sample and benefit now, just like your competitors, from the many advantages of the Cisco DS-SFP-FC16G-LW compatible BlueOptics 16GBASE-LW SFP+ Transceivers and the long-term know-how of CBO in the field of fiber optics. Buy Cisco DS-SFP-FC16G-LW compatible 16GBASE-LW SFP+ from BlueOptics now!
| Performance | |
| SFP transceiver type: | Fiber optic |
| Maximum data transfer rate: | 16000 Mbit/s |
| Interface type: | SFP+ |
| Single-mode fiber (SMF) supported: |  |
| Fiber optic connector: | LC |
| SFP transceiver standard: | LW |
| Maximum transfer distance: | 10000 m |
| Wavelength: | 1310 nm |
| Features | |
| Product colour: | Silver |
| Operational conditions | |
| Maximum operating temperature: | 70 °C |
| Weight & dimensions | |
| Weight: | 20 g |
| Packaging data | |
| Package weight: | 30 g |
