BlueOptics DEM-431XT-DD-BO network transceiver module Fiber optic 10000 Mbit/s SFP+ 850 nm

Superior PerformanceD-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ Transceiver with LC Duplex connector according to MSA standards from the brand BlueOptics. The D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ has a receiver (with 850nm) and a transmitter (with 850nm) for the transfer of optical signals via multi-mode fiber, taking the respective transmission protocol into account. The D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ is suitable for the use in all major D-Link hardware platforms (such as switches, routers, storage systems, load balancers, gauges, etc.) that officially support the original D-Link DEM-431XT-DD 10GBASE-SR SFP+. Each D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ supports Ethernet, Fibre Channel over Ethernet or SDH/SONET high-speed applications of up to 10G per second on up to 300 Meter distance. Request a test sample now!Compatibility and QualityTo ensure 100% compatibility and functionality, all D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ are tested for the use in the respective D-Link hardware while being adapted to the software requirements. Every D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ from the brand BlueOptics is manufactured according to the defined MSA standards, like the original D-Link DEM-431XT-DD Transceiver and contains the same, if not even better, single components from well-known traditional companies for data communication technology, such as high-quality lasers (e.g from Avago or Lumentum) and qualitative ICs (e.g., Maxim Integrated, Netlogic, Mindspeed or Analog Devices). This preselection of the world's best components for optical Transceiver modules results in an over-average product lifetime of more than 10 years for all D-Link DEM-431XT-DD compatible BlueOptics 10GBASE-SR SFP+. Ask for your BlueOptics sample now!Wide Range of ApplicationsD-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ support all popular optical data transfer applications and are designed for the use in switches, routers, storage systems and other hardware solutions that support the original D-Link DEM-431XT-DD 10GBASE-SR SFP+ as stated by the D-Link data sheet. The D-Link DEM-431XT-DD compatible BlueOptics 10GBASE-SR SFP+ is an equivalent replacement for original D-Link DEM-431XT-DD 10GBASE-SR SFP+ whose price has been artificially elevated to finance hardware such as switches. Therefore, from now on you should rely on D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ from the BlueOptics brand with the best price/performance ratio and convince yourself of their quality and functionality. The D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ support all popular applications and offer the same functionality as the original D-Link DEM-431XT-DD 10GBASE-SR SFP+. Try it out and contact us now!Data Transmission at the Speed of LightFiber optic connections for optical data transmissions are not susceptible to electromagnetic interference (EMI) and offer the possibility of a wide variety of bandwidth variations. With D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ of the BlueOptics brand, you can increase your bandwidth and reduce latencies with maximum availability without any loss. D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ have a LC Duplex connector and can send and receive signals simultaneously through optical laser transmission, each over one fiber. The optimal connection should take place via an appropriate BlueOptics fiber patch cord, for example onto a patch panel or directly to another D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ Transceiver. This results in the optimum range and quality of your fiber-optic link. Optimize your network now!Error Analysis with Digital DiagnosticsSimplify troubleshooting, maintenance, and monitoring in your network with the D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ through the Digital Diagnostics Monitoring (DDM) / Digital Optical Monitoring (DOM) interface. With the help of the digital diagnostic function, which complies with MSA SFF-8472, the D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ can deliver the following information in real time: Supply voltage, laser bias current, laser average output power, laser received input power and temperature. This feature of the D-Link DEM-431XT-DD-compatible 10GBASE-SR SFP+ facilitates the remote maintenance of optical transmission links. Please ensure that the DDM / DOM function is supported by the hardware in which the D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ is used, to access these features. Try it and start using BlueOptics products now!Maximum AvailabilityLess maintenance due to a long lifetime. D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ of the brand BlueOptics are using components from leading manufacturers for communication technology only, such as Lasers (like Lumentum or Avago) and Integrated Circuits (including Maxim Integrated, Netlogic, Mindspeed or Analog Devices). For this reason, D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ are designed for above average high operating times of over 1.000.000 MTBF hours. This corresponds to an average life span of 10 years and allows you to set up your network for the future. All D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ provide high availability and reduce the likelihood of a failure of important optical data links in high-speed network systems to an absolute minimum. Benefit from BlueOptics Transceivers now!Full MSA ComplianceEach D-Link DEM-431XT-DD compatible 10GBASE-SR high-availability SFP+ Transceiver complies with the Multi-Source Agreement (MSA) standard SFP+ Transceiver. When setting MSA standards for optical SFP+ Transceiver modules, manufacturers define standards for the SFP+ Transceiver to ensure interoperability with different hardware systems from different manufacturers. Here the SFP+ interface is settled electrically, mechanically and functionally, to grant that the communication of the devices among each other functions smoothly, as well as an exact fit is maintained. By the definitions and specifications defined in the MSA standards, the D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ of the BlueOptics brand behave the same way as the original D-Link DEM-431XT-DD 10GBASE-SR SFP+ and do not compromise any quality and functionality. Ask for a test sample now!Industrial StandardsD-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ meet or exceed industrial standards such as CE and RoHS and the FCC regulations. Through continuous monitoring before, during, and after the ISO9001 manufacturing process, CBO achieves a steadily consistent quality of any D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ Transceiver. The exact operation and the accuracy of the individual components of each D-Link DEM-431XT-DD-compatible 10GBASE-SR SFP+ module, required for high-tech industrial applications, is controlled by various test methods. If you would like to be convinced of the nature and functionality, ask for your personal sample for testing purposes now and profit from the advantages of CBO's D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ without any risk of loss of functionality.Act Now!With the use of D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ of the BlueOptics brand, networks can be equipped to meet increasing requirements. Regardless whether an increased data volume, higher transmission rates, greater scalability, higher performance and/or a higher reliability is desired. With BlueOptics D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ Transceivers, you can improve your connections and reduce your CAPEX for pluggable optics up to 90%. If you have any doubts or concerns with equivalent D-Link DEM-431XT-DD 10GBASE-SR SFP+, do not hesitate to request a free sample and benefit now, just like your competitors, from the many advantages of the D-Link DEM-431XT-DD compatible BlueOptics 10GBASE-SR SFP+ Transceivers and the long-term know-how of CBO in the field of fiber optics. Buy D-Link DEM-431XT-DD compatible 10GBASE-SR SFP+ from BlueOptics now!

Performance
SFP transceiver type:	Fiber optic
Maximum data transfer rate:	10000 Mbit/s
Interface type:	SFP+
Multi-mode fiber (MMF) supported:
Fiber optic connector:	LC
SFP transceiver standard:	SR
Maximum transfer distance:	300 m
Wavelength:	850 nm
Fiber ethernet cabling technology:	10GBASE-SR
Features
Product colour:	Silver
Operational conditions
Maximum operating temperature:	70 °C
Weight & dimensions
Weight:	20 g
Packaging data
Package weight:	30 g