DARK POWER 13 1000WNO COMPROMISE SILENCE AND PERFORMANCEThe be quiet! Dark Power 13 1000W offers 80 PLUS® Titanium efficiency, virtually inaudible operation, and ATX 3.0 compliance for next-gen GPU compatibility.80 PLUS® TITANIUM CERTIFIEDThe highest efficiency certificate availableDark Power 13 1000W is certified with 80 PLUS Titanium and a money-saving energy efficiency rating of up to 95.2%. This provides lots of benefits for your high-end system, including less power consumption and an overall cooler and quieter operation. The standby drain is below 0.1 watts.FUTURE-PROOF YOUR SYSTEMFulfills all ATX 3.0 specificationsDark Power 13 1000W is an ATX 3.0 PSU and comes with both native integration of the 12VHPWR connector for next-generation PCIe 5.0 graphics cards, and PCIe 6+2-pin connectors for support of current-gen GPUs. This makes the PSU extremely versatile and the perfect choice for present high-end systems and the ones to come. THE NEW STANDARD OF POWERFor massive transient loadsDark Power 13 offers 1000W of continuous power with 4 independent 12V rails. Even if the graphics card demands excessive power for a short time: Dark Power 13 1000W handles power excursions up to double its rated power with ease. This ensures reliable operation with the next generation of processors and graphics cards.FRAMELESS SILENT WINGS FANPatented fan technology for virtually inaudible operationThe improved tripod-mounted be quiet! Silent Wings fan enables maximum airflow and a virtually inaudible operation. This is thanks to its unique, airflow-optimized fan blade design along with an advanced fluid-dynamic bearing. A 6-pole fan motor ultimately makes for less vibration, super-long life and minimal power consumption.INNOVATIVE COOLING CONCEPTFor a longer lifespanThe split fan inlet of the Dark Power 13 1000W is a custom-shaped funnel that increases airflow while reducing unwanted turbulence. The wire-free design inside allows the cool air to reach all components flawlessly which ultimately leads to a longer lifespan.READY FOR OVERCLOCKINGPushing the performance of your PSU to the maxDark Power 13 1000W is particularly suitable for overclocking. The overclocking key gives you full overclocking control by manually switching between the default four 12V-rail mode and the alternative massive single-rail operation.WORLD CLASS TOPOLOGYState-of-the-art technology for extremely high efficiencyWith an active rectifier and full bridge LLC technology Dark Power 13 1000W offers some of the most advanced technologies available, resulting in higher efficiency, better regulation and lower ripple noise for an incomparably stable operation.JAPANESE 105° CAPACITORSA testament to high qualityOnly the best components are used in Dark Power 13 1000W. That is why we have exclusively built high-quality Japanese capacitors into the PSU chassis. They are rated to 105°C which ensures stability, reliability, and a long operating life.HIGHEST CONVENIENCE AND BEST CONNECTIVITYModular cablesModular, sleeved cables of up to 120cm in length simplify component installation and reduce annoying clutter. This results in increased airflow and improved cooling in even the largest PC cases
Power | |
Total power: | 1000 W |
AC input voltage: | 100 - 240 V |
Peak power: | 1100 W |
AC input frequency: | 50 - 60 Hz |
Input current: | 13/6 A |
Maximum input current (@110V): | 6 A |
Maximum input current (@220V): | 13 A |
Power factor: | 3 |
Power Factor Correction (PFC) type: | Active |
Combined power (+3.3V): | 125 W |
Combined power (+12V): | 996 W |
Combined power (+5V): | 125 W |
Combined power (-12V): | 6 W |
Combined power (+5Vsb): | 15 W |
Max output current (+3.3V): | 25 A |
Max output current (+12V1): | 32 A |
Max output current (+12V2): | 32 A |
Max output current (+12V3): | 40 A |
Max output current (+12V4): | 40 A |
Max output current (-12V): | 0.5 A |
Max output current (+5Vsb): | 3 A |
Hold time: | 23.2 ms |
Efficiency: | 93.3% |
Power protection features: | Over current, Over voltage, Overheating, Short circuit, Under voltage |
Ports & interfaces | |
Motherboard power connector: | 20+4 pin ATX |
Peripheral (Molex) power connectors (4-pin): | 1 |
Motherboard power cable length: | 60 cm |
Number of SATA power connectors: | 13 |
Number of PATA power connectors: | 3 |
SATA power cable length: | 1050 mm |
PCI Express power connectors (6+2 pin): | 4 |
CPU P4 connector (4-pin): | 1 |
CPU power connector (4+4 pin): | |
ATX power connector (20+4 pin): | |
Floppy disk drive connector: | |
Cabling type: | Modular |
Performance | |
Purpose: | PC |
Power supply unit (PSU) form factor: | ATX |
80 PLUS certification: | 80 PLUS Titanium |
Supported motherboard form factors: | ATX |
ATX version: | 3.0 |
EPS version: | 2.92 |
Silent mode: | |
Noise level: | 25.8 dB |
Bearing technology: | FDB |
ECC: | |
Certification: | BSMI, CB, CCC, CE, cTUVus, CU, FCC, RCM, TÜV, UKCA, Triman |
Design | |
Product colour: | Black |
Cooling type: | Active |
Fan diameter: | 13.5 cm |
Number of fans: | 1 fan(s) |
Fan speed: | 0 - 1800 RPM |
Fan location: | Top |
Illumination: | |
Built-in display: | |
LED indicators: | |
Packaging content | |
Cables included: | DC, SATA |
Cable tie(s) included: | |
Weight & dimensions | |
Width: | 150 mm |
Depth: | 86 mm |
Height: | 175 mm |
Weight: | 2.03 kg |
Packaging data | |
Package width: | 120 mm |
Package depth: | 350 mm |
Package height: | 270 mm |
Package weight: | 4.48 kg |
Package type: | Box |
Technical details | |
Sustainability certificates: | CCC, CE, ENERGY STAR, ErP, RoHS, WEEE |
Warranty period: | 10 year(s) |
Logistics data | |
Shipping (inner) case length: | 50.4 cm |
Shipping (inner) case width: | 30.5 cm |
Shipping (inner) case height: | 36.8 cm |
Pallet gross weight (air): | 19.3 kg |
Certificates | |
Waste Electrical and Electronic Equipment (WEEE) compliance: |