Alpenföhn Dolomit Premium Processor Cooler 12 cm Black 1 pc(s)

High performance Single Tower with 210W TDPDolomitPremiumGerman engineering, an all-black heatsink combined with the multi-award winning Wing Boost 3 ARGB fans: The Dolomit Premium offers enough spare performance to efficiently cool the most demanding systems.High-end heat pipes & copper base plate6 high-end heat pipes with a large contact area on the nickel-plated Copper base plate ensure good heat pick-up at the CPU. Therefore the heat can be conducted to the large area fin stack quickly and efficiently.All-black designThe heat sink is completely black and the stylish top fin rounds the design off. Further are all mounting parts kept black too.Asymmetrical heat sinkThe asymmetrical design of the Dolomit heat sinks allows maximum freedom when choosing RAM modules. No matter how high the heat spreader of the module is, it will fit without any problems. 100% RAM compatibility on the sockets 1200, 115X und AM4.Wing Boost 3 ARGBWith its 16.8 million colours, the Wing Boost 3 ARGB offers numerous possibilities to put your case into the right light. The addressable RGB LED lighting is integrated into the fan housing, put a light shine onto the impeller, and also shines stylish to the outside.Upgradable fan configurationIf even more performance is required, the kit contains four fan clips. This allows the mounting of an additional 120 mm fan on the back of the heat sink, increasing the cooling performance even further.Thermal greaseThe Thermal Grizzly Hydronaut thermal paste with its excellent thermal conductivity can also be used in the overclocking market. Advantages: No hardening, silicone free and not electrically conductive.German EngineeringA perfect balancing act between performance and compatibility was achieved through intelligent material selection and a new Rock Mount 3 mounting system.CompatibilityThe enclosed mounting material allows secure installation on the following sockets:- Intel® LGA: 1200, 1150, 1151, 1155, 1156, 2066, 2011-v3, 2011- AMD: AM4

Performance
Suitable location:	Processor
Type:	Cooler
Fan diameter:	12 cm
Supported processor sockets:	LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 1200 (Socket H5), LGA 2011 (Socket R), LGA 2011-v3 (Socket R), LGA 2066, Socket AM4
Rotational speed (min):	500 RPM
Rotational speed (max):	1600 RPM
Noise level (high speed):	23.5 dB
Airflow:	92.6 m³/h
Maximum air pressure:	2.19 mmH2O
Bearing type:	Hydraulic
Quantity per pack:	1 pc(s)
Design
Product colour:	Black
Base plate material:	Copper
Number of fans:	1 fan(s)
Number of fan blades:	11
Fins material:	Aluminium
Illumination LED:
Illumination colour:	Multi
Fan connector:	3-pin + 4-pin
Power
Power consumption (typical):	1.56 W
Voltage:	7 - 13.2 V
Rated voltage:	12 V
Rated current:	0.13 A
Thermal Design Power (TDP):	210 W
Weight & dimensions
Width:	126 mm
Depth:	86 mm
Height:	154 mm
Weight:	935 g
Fan dimensions (W x D x H):	120 x 120 x 25 mm
Heat pipes diameter:	6 mm