Boost and Trim Automatic Voltage Regulation (AVR)Gives higher application availability by correcting low and high voltage conditions without using the battery.Intelligent Battery ManagementMaximizes battery performance, life, and reliability through intelligent, precision charging.Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Cold-start capableProvides temporary battery power when the utility power is out.Disconnected battery notificationWarns when a battery is not available to provide backup power.Generator CompatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.Network manageableProvides remote management of the UPS over the network.SmartSlotCustomize UPS capabilities with management cards.Audible AlarmsActively let you know if the unit is on battery, if the battery is low or if there is an overload condition.LED status indicatorsQuickly understand unit and power status with visual indicators.Serial ConnectivityProvides management of the UPS via a serial port.USB ConnectivityProvides management of the UPS via a USB port (not available on all models).Disconnected battery notificationWarns when a battery is not available to provide backup power.InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedPredictive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.Resettable circuit breakersEnables a quick recovery from overload events.Adjustable voltage-transfer pointsMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.Field-replaceable power distribution panelEnsures compatibility with equipment that has different plug types.
| Features | |
| Output power capacity: | 0.75 kVA |
| Output power: | 500 W |
| Input frequency: | 50/60 Hz |
| Surge energy rating: | 340 J |
| Audible alarm(s): |  |
| Battery | |
| Typical backup time at full load: | 4.8 min |
| Typical backup time at half load: | 16.4 min |
| Battery recharge time: | 3 h |
| Hot-swap battery: | |
| Design | |
| Product colour: | Black |
| LED indicators: | |
| Certification: | C-tick,CE,EN 50091-1,EN 50091-2,EN 55022 Class A,GOST,IEC 60950,VDE |
| Operational conditions | |
| Operating temperature (T-T): | 0 - 40 °C |
| Storage temperature (T-T): | -15 - 45 °C |
| Operating altitude: | 0 - 3000 m |
| Non-operating altitude: | 0 - 15000 m |
| Weight & dimensions | |
| Weight: | 13.2 kg |
| Package weight: | 14.6 kg |
| Logistics data | |
| Harmonized System (HS) code: | 85078000 |
| Other features | |
| Output connections: | 6 x IEC 320 C13 1 x IEC Jumpers |
| Input connection type: | IEC-320-C14 inlet |
| Dimensions (WxDxH): | 137 x 358 x 157 mm |
| Nominal output voltage: | 230 V |
| Nominal input voltage: | 230 V |
| Package dimensions (WxDxH): | 270 x 500 x 290 mm |
