APC Smart-UPS Line-Interactive 1 kVA 640 W 4 AC outlet(s)

Boost and Trim Automatic Voltage Regulation (AVR)Gives higher application availability by correcting low and high voltage conditions without using the battery.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Cold-start capableProvides temporary battery power when the utility power is out.Disconnected battery notificationWarns when a battery is not available to provide backup power.Network manageableProvides remote management of the UPS over the network.Audible alarmsActively let you know if the unit is on battery, if the battery is low or if there is an overload condition.LED status indicatorsQuickly understand unit and power status with visual indicators.Serial ConnectivityProvides management of the UPS via a serial port.USB connectivityProvides management of the UPS via a USB port (not available on all models).Disconnected battery notificationWarns when a battery is not available to provide backup power.InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure® Manager.User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced.Predictive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.Resettable circuit breakersEnables a quick recovery from overload events.Adjustable voltage-transfer pointsMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.Field-replaceable power distribution panelEnsures compatibility with equipment that has different plug types.

Features
UPS topology:	Line-Interactive
Output power capacity:	1 kVA
Output power:	640 W
Waveform:	Sine
Input operation voltage (min):	151 V
Input operation voltage (max):	302 V
Input frequency:	50/60 Hz
Surge energy rating:	480 J
Noise level:	55 dB
Surge protection:
Audible alarm(s):
Ports & interfaces
AC outlet types:	C13 coupler
Power plug:	C14 coupler
AC outlets quantity:	4 AC outlet(s)
Number of output IEC jumpers:	2
USB port:
Serial interface:
Serial interface type:	RS-232
SmartSlot:
Battery
Battery technology:	Sealed Lead Acid (VRLA)
Battery capacity:	216 VAh
Typical backup time at full load:	5.4 min
Typical backup time at half load:	14.5 min
Battery life (max):	6 year(s)
Battery recharge time:	2 h
Hot-swap battery:
Automatic battery test:
Design
Form factor:	Rackmount
Product colour:	Black
Rack capacity:	1U
LED indicators:	Battery replacement
Certification:	C-tick, CE, EN 50091-1, EN 50091-2, GOST, VDE, PEP, EOLI
Operational conditions
Operating temperature (T-T):	0 - 40 °C
Storage temperature (T-T):	-15 - 45 °C
Operating relative humidity (H-H):	0 - 95%
Storage relative humidity (H-H):	0 - 95%
Operating altitude:	0 - 3000 m
Non-operating altitude:	0 - 15000 m
Technical details
Sustainability certificates:	RoHS
Weight & dimensions
Width:	432 mm
Depth:	660 mm
Height:	44 mm
Weight:	21.8 kg
Package width:	559 mm
Package depth:	775 mm
Package height:	191 mm
Package weight:	25.4 kg
Packaging data
Rack mount kit:
Cables included:	RS-232, USB cable
Manual:
Software CD:
Logistics data
Products per pallet:	8 pc(s)
Harmonized System (HS) code:	85078000
Other features
Interface:	DB-9 RS-232, SmartSlot, USB
Input connection type:	IEC-320 C14
Nominal output voltage:	230 V
Nominal input voltage:	230 V