High density, double-conversion on-line power protection with scalable runtimeIncludes: CD with software, Comms cable, Documentation CD, Installation guide, Removable support feet, USB cable, Warranty cardBattery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceECO ModeOperating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protectionLCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.Scalable runtimeAllows additional run time to be quickly added as needed.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedIntelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.LED status indicatorsQuickly understand unit and power status with visual indicators.Serial connectivityProvides management of the UPS via a serial port.InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.SmartSlotCustomize UPS capabilities with management cards.Network manageableProvides remote power management of the UPS over the network.Flash upgradeable firmwareInstall maintenance releases of firmware remotely using FTP.Plug-and-Play external batteriesEnsures clean, uninterrupted power to the loads when adding extra runtime to the UPS.Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Predictive failure notification.Provides early-warning fault analysis ensuring proactive component replacement.Disconnected battery notificationWarns when a battery is not available to provide backup power.Audible alarmsProvides notification of changing utility power and UPS power conditionsGenerator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.Cold-start capableProvides temporary battery power when the utility power is out.Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
| Features | |
| UPS topology: | Double-conversion (Online) |
| Output power capacity: | 1.5 kVA |
| Output power: | 1500 W |
| Waveform: | Sine |
| Input operation voltage (min): | 100 V |
| Input operation voltage (max): | 275 V |
| Input frequency: | 40/70 Hz |
| Output operation voltage (min): | 220 V |
| Output operation voltage (max): | 240 V |
| Output frequency: | 50/60 Hz |
| Surge energy rating: | 432 J |
| Crest factor: | 3:1 |
| Emergency Power Off (EPO): |  |
| Noise level: | 50 dB |
| Audible alarm(s): | |
| Ports & interfaces | |
| USB port: | |
| Serial interface: | |
| Serial interface type: | RJ-45 |
| SmartSlot: | |
| Battery | |
| Battery technology: | Sealed Lead Acid (VRLA) |
| Battery life (max): | 5 year(s) |
| Battery recharge time: | 3 h |
| Hot-swap battery: | |
| Design | |
| Form factor: | Rackmount/Tower |
| Product colour: | Black |
| Cable length: | 1.83 m |
| Display type: | LCD |
| LED indicators: | |
| International Protection (IP) code: | IP20 |
| Certification: | CE, EAC |
| Operational conditions | |
| Operating temperature (T-T): | 0 - 40 °C |
| Storage temperature (T-T): | -20 - 50 °C |
| Operating relative humidity (H-H): | 0 - 95% |
| Storage relative humidity (H-H): | 0 - 95% |
| Technical details | |
| Sustainability certificates: | Green Premium, RoHS |
| Weight & dimensions | |
| Width: | 85 mm |
| Depth: | 505 mm |
| Height: | 432 mm |
| Weight: | 20.5 kg |
| Package width: | 594 mm |
| Package depth: | 749 mm |
| Package height: | 246 mm |
| Package weight: | 29.6 kg |
| Packaging data | |
| Manual: | |
| Logistics data | |
| Products per pallet: | 12 pc(s) |
| Harmonized System (HS) code: | 85078000 |
