APC Smart-UPS X 2200VA Line-Interactive 2.2 kVA 1980 W 9 AC outlet(s)

Cold-start capableProvides temporary battery power when the utility power is out.Energy meterProvides actual kilowatt hours of usage for energy conscious users.Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.High online efficiencyReduces utlility costs, generates less heat.Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.Preinstalled network management cardProvides for remote management and control of the UPS over a network out of the box.Single switched outlet groupSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.SmartSlotCustomize UPS capabilities with management cards.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.AvailabilityDisconnected battery notificationWarns when a battery is not available to provide backup power.Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.Boost and Trim Automatic Voltage Regulation (AVR)Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.ManageabilityNetwork manageableProvides remote power management of the UPS over the network.Serial connectivityProvides management of the UPS via a serial port.Audible alarmsActively let you know if the unit is on battery, if the battery is low or if there is an overload condition.Disconnected battery notificationWarns when a battery is not available to provide backup power.LED status indicatorsQuickly understand unit and power status with visual indicators.USB connectivityProvides management of the UPS via a USB port (not available on all models).SafetySafety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Marketing FeaturesLow operating and maintenance costs with high efficiency, proven reliability and intelligent battery managementPatented green operating mode achieves efficiencies over 97%. Smart-ups was the first network UPS to be Energy Star certified. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging.Dynamic battery replacement date indicator and automatic self tests insure battery reliability and warn in advance of needing replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Designed and manufactured by APC for over 23 years, Smart-UPS is the world s most trusted network UPS with over 25 million units sold.Save time with easy and convenient remote accessibilityNetwork manageable via serial, USB or optional ethernet. Includes Powerchute® Business Edition Software for convenient monitoring and control, safe operating system shutdown and innovative energy management capabilities.Smarter productivity with ability to tailor to your specific application needsIntuitive LCD interface provides clear information with the ability to configure the UPS locally with easy to use navigation keys. Over 15 different programmable settings including switched outlet group control allow for application specific settings, thresholds and notifications.Peace of mind that comes with full equipment compatibility and reliability of a leaderProvides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry s most rigorous standards.Avoids costly power problems by keeping your IT equipment and data safe and availableNetwork grade power conditioning protects from damaging surges and disruptive noise. Solid state automatic voltage regulation boosts low input voltage up to 30% and trims high voltage up to 12% without battery operation. Reliable battery back-up capacity to power through outages or gracefully shutdown systemsServiceabilityResettable circuit breakersEnables a quick recovery from overload events.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedPredictive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceAdaptabilityAdjustable voltage-transfer pointsMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Features
UPS topology:	Line-Interactive
Output power capacity:	2.2 kVA
Output power:	1980 W
Waveform:	Sine
Input operation voltage (min):	208 V
Input operation voltage (max):	230 V
Input frequency:	50/60 Hz
Output operation voltage (min):	208 V
Output operation voltage (max):	240 V
Output frequency:	50/60 Hz
Output frequency regulation:	+/- 3 Hz
Output voltage regulation:	5%
Surge energy rating:	645 J
Response time:	10 ms
Emergency Power Off (EPO):
Noise level:	55 dB
Surge protection:
Audible alarm(s):
Web-based management:
Audible alarm modes:	Battery replacement
Auto-restart:
Ports & interfaces
AC outlet types:	C13 coupler, C19 coupler, C20 coupler
Power plug:	C20 coupler
AC outlets quantity:	9 AC outlet(s)
USB 2.0 ports quantity:	1
Ethernet LAN (RJ-45) ports:	1
Battery
Battery technology:	Sealed Lead Acid (VRLA)
Battery capacity:	702 Ah
Battery recharge time:	3 h
Hot-swap battery:
Automatic battery test:
Cold start:
Design
Form factor:	Rackmount/Tower
Product colour:	Black
Rack capacity:	2U
Display type:	LCD
LED indicators:
Certification:	CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, GS Mark, IRAM, RCM, VDE, WEEE
Operational conditions
Operating temperature (T-T):	0 - 40 °C
Storage temperature (T-T):	-15 - 45 °C
Operating relative humidity (H-H):	0 - 95%
Storage relative humidity (H-H):	0 - 95%
Operating altitude:	0 - 3000 m
Non-operating altitude:	0 - 15000 m
Technical details
Sustainability certificates:	RoHS
Weight & dimensions
Width:	432 mm
Depth:	667 mm
Height:	85 mm
Weight:	37.4 kg
Package width:	596 mm
Package depth:	869 mm
Package height:	243 mm
Package weight:	45.3 kg
Packaging data
Rack mount kit:
Cables included:	Input power cable, USB cable
Quick installation guide:
Resource CD:
Logistics data
Products per pallet:	8 pc(s)
Harmonized System (HS) code:	85078000
Other features
Output voltage:	230 V