Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.Adjustable voltage-transfer pointsMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.Audible alarmsProvides notification of changing utility power and UPS power conditionsAutomatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceBoost and Trim Automatic Voltage Regulation (AVR)Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).Cold-start capableProvides temporary battery power when the utility power is out.Disconnected battery notificationWarns when a battery is not available to provide backup power.Energy meterProvides actual kilowatt hours of usage for energy conscious users.Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.High online efficiencyReduces utility costs, generates less heat.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedIntelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.LED IndicatorsProvide easy-to-read status of the unit and utility power conditions.Network manageableProvides remote power management of the UPS over the network.Outlet group controlTurn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).Predictive failure notification.Provides early-warning fault analysis ensuring proactive component replacement.Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.Pure sine wave output on batterySimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Sequenced network shutdown and rebootCustomize network shutdown and reboot sequence of connected servers and UPSs.Serial connectivityProvides management of the UPS via a serial port.Single switched outlet groupSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.SmartConnectInnovative, easy to use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services.StruxureWare Data Center Expert compatibleEnables centralized management via StruxureWare Data Center Expert.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.USB connectivityProvides management of the UPS via a USB port (not available on all models).User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Wide input voltage rangeDesigned for harsh electrical environments to save battery life.
| Features | |
| UPS topology: | Line-Interactive |
| Output power capacity: | 3 kVA |
| Output power: | 2700 W |
| Waveform: | Sine |
| Input operation voltage (min): | 151 V |
| Input operation voltage (max): | 302 V |
| Input frequency: | 50/60 Hz |
| Output operation voltage (min): | 220 V |
| Output operation voltage (max): | 240 V |
| Automatic Voltage Regulation (AVR): |  |
| Surge energy rating: | 320 J |
| Hold time (min): | 4 ms |
| Hold time (max): | 8 ms |
| Efficiency: | 98.9% |
| Noise level: | 55 dB |
| Audible alarm(s): | |
| Auto-restart: | |
| Ports & interfaces | |
| AC outlet types: | C13 coupler, C19 coupler |
| Power plug: | C20 coupler |
| AC outlets quantity: | 9 AC outlet(s) |
| Number of output IEC jumpers: | 3 |
| USB port: | |
| Serial interface: | |
| Serial interface type: | RJ-45 |
| Ethernet LAN (RJ-45) ports: | 1 |
| SmartSlot: | |
| Battery | |
| Battery technology: | Sealed Lead Acid (VRLA) |
| Battery capacity: | 547 VAh |
| Typical backup time at full load: | 3.2 min |
| Typical backup time at half load: | 11.5 min |
| Battery life (max): | 5 year(s) |
| Battery recharge time: | 3 h |
| Hot-swap battery: | |
| Automatic battery test: | |
| Cold start: | |
| Design | |
| Form factor: | Rackmount |
| Product colour: | Black |
| Rack capacity: | 2U |
| Cable length: | 2 m |
| Display type: | LCD |
| LED indicators: | Status |
| Certification: | CE, EAC, EN 60950, EN/IEC 62040-1, EN/IEC 62040-2, GS Mark, IRAM, RCM, VDE, WEEE, REACH, PEP, EOLI |
| Operational conditions | |
| Operating temperature (T-T): | 0 - 40 °C |
| Storage temperature (T-T): | -15 - 45 °C |
| Operating relative humidity (H-H): | 0 - 95% |
| Storage relative humidity (H-H): | 0 - 95% |
| Operating altitude: | 0 - 3000 m |
| Non-operating altitude: | 0 - 15000 m |
| Technical details | |
| Sustainability certificates: | Green Premium, RoHS |
| Weight & dimensions | |
| Width: | 480 mm |
| Depth: | 683 mm |
| Height: | 86 mm |
| Weight: | 44.3 kg |
| Package width: | 600 mm |
| Package depth: | 980 mm |
| Package height: | 254 mm |
| Package weight: | 51.7 kg |
| Packaging data | |
| Rack mount kit: | |
| Cables included: | RS-232, USB cable |
| Quick installation guide: | |
| Software CD: | |
| Bundled software: | Powershute Business Edition |
| Logistics data | |
| Harmonized System (HS) code: | 85078000 |
| Other features | |
| Nominal output voltage: | 230 V |
| Nominal input voltage: | 230 V |
